Aabedi Bafraajerd, Abdollah
Surface Coating of Acrylic acid-Chitosan Nano Hydrogel on Water Uptake, strengths and Optical Properties of Paper [Volume 34, Issue 1, 2019, Pages 1-11]
Abdolkhani, Ali
Production and Characterization of Lignocellulosic Aerogel from Rice Straw [Volume 34, Issue 1, 2019, Pages 124-133]
Abdulkhani, Ali
The effect of hot water and alkaline pre-extractions on properties of bagasse pulps produced by monoethanolamine-AQ process [Volume 34, Issue 3, 2019, Pages 409-423]
Afra, Elyas
Effect of coating packing paper with polylactic acid-chitosan and polylactic acid-nano-chitosan complexes [Volume 34, Issue 4, 2020, Pages 507-519]
Aghanaghifar, Leila
Improved adsorption performance of sawdust by ultrasonic wave: Optimization through response surface methodology, kinetic and thermodynamic studies [Volume 34, Issue 1, 2019, Pages 12-26]
Ahmadi ladjimi, Ali
Assessment of the Biodegradability of Poly-Lactic Acid - Canola stem flour Composites against Natural Biological Factors [Volume 34, Issue 1, 2019, Pages 50-61]
Ali, Abdolkhani
Effects of free and microencapsulated biocides on characteristics of wood coatings and their mold growth resistance [Volume 34, Issue 1, 2019, Pages 39-49]
Archin, Saltanat
Improved adsorption performance of sawdust by ultrasonic wave: Optimization through response surface methodology, kinetic and thermodynamic studies [Volume 34, Issue 1, 2019, Pages 12-26]
Azadfallah, Mohammad
Effects of free and microencapsulated biocides on characteristics of wood coatings and their mold growth resistance [Volume 34, Issue 1, 2019, Pages 39-49]
Azadfallah, Mohammad
Modification of deinked pulp (DIP) by CMC Grafting [Volume 34, Issue 4, 2020, Pages 475-487]
D
Dahmardeh, Habib
Assessment of the Biodegradability of Poly-Lactic Acid - Canola stem flour Composites against Natural Biological Factors [Volume 34, Issue 1, 2019, Pages 50-61]
Dashti, Hadi
The effect of preheating in nitrogen medium on acoustic properties of walnut and white mulberry [Volume 34, Issue 3, 2019, Pages 349-360]
Dehghan, Moein
Assessment of the Biodegradability of Poly-Lactic Acid - Canola stem flour Composites against Natural Biological Factors [Volume 34, Issue 1, 2019, Pages 50-61]
Dehghani Firouzabadi, Mohammad Reza
Optimization of Coating Dimethoxydimethylsilane Using Plasma Enhanced Chemical Vapor Deposition (PECVD) on Coated Paper with Ethylene Vinyl Alcohol [Volume 34, Issue 1, 2019, Pages 100-111]
Dehghani firozabadi, Mohamadreza
Barrier and Structural Properties of Coated Trimethoxymethylsilane Layer
on Coated Paper with Ethylene Vinyl Alcohol [Volume 34, Issue 2, 2019, Pages 255-262]
DoosthoseinI, Kazem
Investigation on the possibility of oriented strand board (OSB) production from hornbeam wood [Volume 34, Issue 1, 2019, Pages 140-156]
E
Ebrahimi, Ghanbar
Investigation on the possibility of oriented strand board (OSB) production from hornbeam wood [Volume 34, Issue 1, 2019, Pages 140-156]
Efhamisisi, Davood
Effects of free and microencapsulated biocides on characteristics of wood coatings and their mold growth resistance [Volume 34, Issue 1, 2019, Pages 39-49]
Eskandari, Ahmad Reza
Consumer behaviors in the decision- making process of foreign and domestic household wooden furniture buying [Volume 34, Issue 2, 2019, Pages 167-179]
Esmaeilzadeh Saeih, Salume
Effects of Nano Cellulose and Nano Clay on Properties of Biodegradable Composites Made of Recycled Polymers and Industrial Saw Dust [Volume 34, Issue 3, 2019, Pages 337-348]
F
Faezipour, Mohamad Mehdi
Investigation on the possibility of oriented strand board (OSB) production from hornbeam wood [Volume 34, Issue 1, 2019, Pages 140-156]
Farhadi, Faezeh
Effect of test temperature on creep behavior of heat treated of Velvet Maple [Volume 34, Issue 3, 2019, Pages 424-434]
G
Ghahri, Saman
Effect of soy flour addition into urea-formaldehyde resin on formaldehyde emission [Volume 34, Issue 3, 2019, Pages 387-396]
Ghasemi, Esmaeil
Effects of Nano Cellulose and Nano Clay on Properties of Biodegradable Composites Made of Recycled Polymers and Industrial Saw Dust [Volume 34, Issue 3, 2019, Pages 337-348]
Ghasemi, hadi
Effect of nano gel wollastonite on physical, mechanical and morphological properties of bagasse-cement composites [Volume 34, Issue 3, 2019, Pages 397-408]
Ghofrani, Mohammad
Compression and tension strength properties of detachable joints in MDF and particleboard [Volume 34, Issue 2, 2019, Pages 205-216]
Gholami, Zahra
Modification of deinked pulp (DIP) by CMC Grafting [Volume 34, Issue 4, 2020, Pages 475-487]
Gholamiyan, Hadi
The effect of corona treatment to improve the mechanical properties of nitrocellulose and polyurethane coatings used in wooden furniture [Volume 34, Issue 3, 2019, Pages 326-336]
Ghomi marzdashti, Hamidreza
Effect of silver nanoparticles prepared by plasma method on properties of papers made from Kraft pulp [Volume 34, Issue 1, 2019, Pages 76-88]
Gohari, Saleh
Influence of Sheet Type, Layout, and Height of Cardboard Tubes as Cores on the Mechanical Properties of the Sandwich Panel [Volume 34, Issue 4, 2020, Pages 563-571]
Golbabaei, Fardad
Influence of filler modification on physical and mechanical properties of wood plastic composite [Volume 34, Issue 4, 2020, Pages 435-447]
Golbabaei, Fardad
Effect of nano gel wollastonite on physical, mechanical and morphological properties of bagasse-cement composites [Volume 34, Issue 3, 2019, Pages 397-408]
Golbabaei, Fardad
The use of bagasse in the manufacture of reinforced composite reinforced cement-fiber [Volume 34, Issue 2, 2019, Pages 302-311]
H
Hajihassani, Reza
Influence of filler modification on physical and mechanical properties of wood plastic composite [Volume 34, Issue 4, 2020, Pages 435-447]
Hajihassani, Reza
The use of bagasse in the manufacture of reinforced composite reinforced cement-fiber [Volume 34, Issue 2, 2019, Pages 302-311]
Haji hassani, Reza
The Potential of utilizing corn cop in particleboard production [Volume 34, Issue 4, 2020, Pages 461-474]
Hamedi, Sepideh
Chemical Modification of the xylan extracted from bagasse pith to prepare antibacterial carboxymethyl xylan/chitosan film [Volume 34, Issue 4, 2020, Pages 448-460]
Hamzeh, Yahya
Production and Characterization of Lignocellulosic Aerogel from Rice Straw [Volume 34, Issue 1, 2019, Pages 124-133]
Hedjazi, Sahab
Production and Characterization of Lignocellulosic Aerogel from Rice Straw [Volume 34, Issue 1, 2019, Pages 124-133]
Hedjazi, Sahab
The effect of hot water and alkaline pre-extractions on properties of bagasse pulps produced by monoethanolamine-AQ process [Volume 34, Issue 3, 2019, Pages 409-423]
Hosseini, Behzad
Effect of soy flour addition into urea-formaldehyde resin on formaldehyde emission [Volume 34, Issue 3, 2019, Pages 387-396]
J
Jalali Torshizi, Hossein
Surface Coating of Acrylic acid-Chitosan Nano Hydrogel on Water Uptake, strengths and Optical Properties of Paper [Volume 34, Issue 1, 2019, Pages 1-11]
Jalali-Torshizi, Hossein
Effect of silver nanoparticles prepared by plasma method on properties of papers made from Kraft pulp [Volume 34, Issue 1, 2019, Pages 76-88]
Jalali-Torshizi, Hossein
Effect of alkyl ketene dimers (AKD) sizing on the properties of pulp and paper made from recycled fibers [Volume 34, Issue 1, 2019, Pages 112-123]
K
Kargarfard, Abolfazl
The Potential of utilizing corn cop in particleboard production [Volume 34, Issue 4, 2020, Pages 461-474]
Keshtegar, Barat ali
The influence of reinforcement of polyvinyl acetate adhesive (PVAc) with carbon nanofiber (CNF) on the bending moment capacity of the corner joint of the furniture [Volume 34, Issue 2, 2019, Pages 242-254]
Khademi Eslam, Habibollah
Investigation on the possibility of oriented strand board (OSB) production from hornbeam wood [Volume 34, Issue 1, 2019, Pages 140-156]
Khademi Eslam, Habibollah
Effects of Nano Cellulose and Nano Clay on Properties of Biodegradable Composites Made of Recycled Polymers and Industrial Saw Dust [Volume 34, Issue 3, 2019, Pages 337-348]
Khaki, Ali
Influence of Sheet Type, Layout, and Height of Cardboard Tubes as Cores on the Mechanical Properties of the Sandwich Panel [Volume 34, Issue 4, 2020, Pages 563-571]
Khosravani, Amir
Investigation on adsorption, configuration and performance of chitosan polyelectrolyte in pulp slurry by ellipsometry technique [Volume 34, Issue 4, 2020, Pages 535-546]
M
Madhoushi, Mehrab
The influence of reinforcement of polyvinyl acetate adhesive (PVAc) with carbon nanofiber (CNF) on the bending moment capacity of the corner joint of the furniture [Volume 34, Issue 2, 2019, Pages 242-254]
Mahdavi, Saeed
Comparison of thermal energy production from wood biomass [Volume 34, Issue 3, 2019, Pages 313-325]
Majdabadifarahani, Parastoo
Thermography as a non-Destructive method in evaluation of wood density for Oak and Beech [Volume 34, Issue 1, 2019, Pages 89-99]
Mehrandish, Mohammad mahdi
Investigation of Fire Resistance in reformed Paulownia Wood with citric acid and Comparison with Different of Fire Retardants [Volume 34, Issue 4, 2020, Pages 547-562]
MirHoseini Taba, Mjtaba
Influence of Sheet Type, Layout, and Height of Cardboard Tubes as Cores on the Mechanical Properties of the Sandwich Panel [Volume 34, Issue 4, 2020, Pages 563-571]
Miri Tari, Seyed Mahmoud
Effects of free and microencapsulated biocides on characteristics of wood coatings and their mold growth resistance [Volume 34, Issue 1, 2019, Pages 39-49]
Mirzapour babajan, akbar
Investigating the Impact of Monetary Policy on Value Added Growth in Iran's Industrial Sub-Sectors (Positive Mathematical Programming Approach) with Emphasis on Wood industry sub-sector [Volume 34, Issue 4, 2020, Pages 520-534]
Mohammadi Achachlouei, Mohsen
The effect of Benomyl antifungal on the gall ink used in historical documents [Volume 34, Issue 2, 2019, Pages 276-289]
Moradian Gilan, Kajal
The effect of hot water and alkaline pre-extractions on properties of bagasse pulps produced by monoethanolamine-AQ process [Volume 34, Issue 3, 2019, Pages 409-423]
N
Nazarnezhad, noureddin
Investigation of mechanical and optical properties of papers coated with Polycaprolactone - Nanocrystalline cellulose - zinc oxide Nanoparticle [Volume 34, Issue 1, 2019, Pages 27-38]
Nazerian, Morteza
Effect of web configuration and flange type on bending strength of I-joist beams [Volume 34, Issue 2, 2019, Pages 263-275]
Nikkhah Dafchahi, Mostafa
Efficiency of Response Surface Methodology to Determine Effective Factors on Production Process of Carboxymethyl cellulose from Populus [Volume 34, Issue 2, 2019, Pages 290-301]
O
Otarod, Mona
Morphological characteristics and chemical components of sunflower stalk (Helianthus annus. Var. cheernianka 66) cultivated in Astara [Volume 34, Issue 3, 2019, Pages 372-386]
P
Poladi, Milad
Efficiency of Response Surface Methodology to Determine Effective Factors on Production Process of Carboxymethyl cellulose from Populus [Volume 34, Issue 2, 2019, Pages 290-301]
Pourmousa, Shademan
Consumer behaviors in the decision- making process of foreign and domestic household wooden furniture buying [Volume 34, Issue 2, 2019, Pages 167-179]
Pourtahmasi, Kambiz
The effect of preheating in nitrogen medium on acoustic properties of walnut and white mulberry [Volume 34, Issue 3, 2019, Pages 349-360]
R
Rahimi, Atefe
Production and Characterization of Lignocellulosic Aerogel from Rice Straw [Volume 34, Issue 1, 2019, Pages 124-133]
Ramezani, Narges
Investigation on adsorption, configuration and performance of chitosan polyelectrolyte in pulp slurry by ellipsometry technique [Volume 34, Issue 4, 2020, Pages 535-546]
Ramezani, Omid
Effect of storage and bleaching of cotton fiber pulp on the stability of Bond paper optical properties [Volume 34, Issue 2, 2019, Pages 217-227]
Ramezanpour-Charvadeh, Mohaddeseh
Effect of silver nanoparticles prepared by plasma method on properties of papers made from Kraft pulp [Volume 34, Issue 1, 2019, Pages 76-88]
RANJBAR, BABAK
Study of mental and emotional reactions to decoration color Living and working environment.. [Volume 34, Issue 1, 2019, Pages 134-139]
Rashidi, Alimorad
The influence of reinforcement of polyvinyl acetate adhesive (PVAc) with carbon nanofiber (CNF) on the bending moment capacity of the corner joint of the furniture [Volume 34, Issue 2, 2019, Pages 242-254]
Rasooly Garmaroody, Esmaeil
Effect of storage and bleaching of cotton fiber pulp on the stability of Bond paper optical properties [Volume 34, Issue 2, 2019, Pages 217-227]
Rasooly Garmaroody, Esmaeil
Chemical Modification of the xylan extracted from bagasse pith to prepare antibacterial carboxymethyl xylan/chitosan film [Volume 34, Issue 4, 2020, Pages 448-460]
Rezaian, Alireza
Effect of web configuration and flange type on bending strength of I-joist beams [Volume 34, Issue 2, 2019, Pages 263-275]
Rezvani, Mohammad Hadi
Investigation of Fire Resistance in reformed Paulownia Wood with citric acid and Comparison with Different of Fire Retardants [Volume 34, Issue 4, 2020, Pages 547-562]
Rodi, Hamidreza
Effect of alkyl ketene dimers (AKD) sizing on the properties of pulp and paper made from recycled fibers [Volume 34, Issue 1, 2019, Pages 112-123]
Rodi, Hamid reza
Effect of silver nanoparticles prepared by plasma method on properties of papers made from Kraft pulp [Volume 34, Issue 1, 2019, Pages 76-88]
Roohani, Mehdi
Modification of deinked pulp (DIP) by CMC Grafting [Volume 34, Issue 4, 2020, Pages 475-487]
Roohnia, Mehran
Thermography as a non-Destructive method in evaluation of wood density for Oak and Beech [Volume 34, Issue 1, 2019, Pages 89-99]
Rudi, Hamidreza
Investigation on adsorption, configuration and performance of chitosan polyelectrolyte in pulp slurry by ellipsometry technique [Volume 34, Issue 4, 2020, Pages 535-546]
S
Salehi, Kamyar
The use of bagasse in the manufacture of reinforced composite reinforced cement-fiber [Volume 34, Issue 2, 2019, Pages 302-311]
Saraeyan, Ahmad Reza
Optimization of Coating Dimethoxydimethylsilane Using Plasma Enhanced Chemical Vapor Deposition (PECVD) on Coated Paper with Ethylene Vinyl Alcohol [Volume 34, Issue 1, 2019, Pages 100-111]
Saraeyan, Ahmad Reza
Barrier and Structural Properties of Coated Trimethoxymethylsilane Layer
on Coated Paper with Ethylene Vinyl Alcohol [Volume 34, Issue 2, 2019, Pages 255-262]
Shakeri, Alireza
Optimization of Coating Dimethoxydimethylsilane Using Plasma Enhanced Chemical Vapor Deposition (PECVD) on Coated Paper with Ethylene Vinyl Alcohol [Volume 34, Issue 1, 2019, Pages 100-111]
Shakeri, Alireza
Barrier and Structural Properties of Coated Trimethoxymethylsilane Layer
on Coated Paper with Ethylene Vinyl Alcohol [Volume 34, Issue 2, 2019, Pages 255-262]
Shamsiyan, Mohamma
Effect of web configuration and flange type on bending strength of I-joist beams [Volume 34, Issue 2, 2019, Pages 263-275]
Sharifi, Seyed Hassan
Improved adsorption performance of sawdust by ultrasonic wave: Optimization through response surface methodology, kinetic and thermodynamic studies [Volume 34, Issue 1, 2019, Pages 12-26]
Sharifi, Seyed Hassan
Investigation of mechanical and optical properties of papers coated with Polycaprolactone - Nanocrystalline cellulose - zinc oxide Nanoparticle [Volume 34, Issue 1, 2019, Pages 27-38]
Sharifi, Seyed Hassan
Efficiency of Response Surface Methodology to Determine Effective Factors on Production Process of Carboxymethyl cellulose from Populus [Volume 34, Issue 2, 2019, Pages 290-301]
Shidpour, Reza
Surface Coating of Acrylic acid-Chitosan Nano Hydrogel on Water Uptake, strengths and Optical Properties of Paper [Volume 34, Issue 1, 2019, Pages 1-11]
Shidpour, Reza
Effect of alkyl ketene dimers (AKD) sizing on the properties of pulp and paper made from recycled fibers [Volume 34, Issue 1, 2019, Pages 112-123]
Sixta, Herbert
The effect of hot water and alkaline pre-extractions on properties of bagasse pulps produced by monoethanolamine-AQ process [Volume 34, Issue 3, 2019, Pages 409-423]
Sodeifi, Bardia
Investigation of mechanical and optical properties of papers coated with Polycaprolactone - Nanocrystalline cellulose - zinc oxide Nanoparticle [Volume 34, Issue 1, 2019, Pages 27-38]
T
Tabei, Asghar
Morphological characteristics and chemical components of sunflower stalk (Helianthus annus. Var. cheernianka 66) cultivated in Astara [Volume 34, Issue 3, 2019, Pages 372-386]
Taghiyari, Hamid Reza
Effect of soy flour addition into urea-formaldehyde resin on formaldehyde emission [Volume 34, Issue 3, 2019, Pages 387-396]
Taheri, Zohreh
Effect of alkyl ketene dimers (AKD) sizing on the properties of pulp and paper made from recycled fibers [Volume 34, Issue 1, 2019, Pages 112-123]
Tajdini, Ajang
Consumer behaviors in the decision- making process of foreign and domestic household wooden furniture buying [Volume 34, Issue 2, 2019, Pages 167-179]
Talaei, Aisona
Investigation of Fire Resistance in reformed Paulownia Wood with citric acid and Comparison with Different of Fire Retardants [Volume 34, Issue 4, 2020, Pages 547-562]
Tamjidi, Abbas
Investigation on the possibility of oriented strand board (OSB) production from hornbeam wood [Volume 34, Issue 1, 2019, Pages 140-156]
V
Vaysi, Ramin
A Study on the Possibility of Identification and Comparison of Metallic Ions and Chemical Components in Wood of Persuan maple and Caucasian maple tree by Atomic Absorption and GC-MS Methods [Volume 34, Issue 3, 2019, Pages 361-371]
Y
Yazdi Mymand, َAli Akbar
Influence of Sheet Type, Layout, and Height of Cardboard Tubes as Cores on the Mechanical Properties of the Sandwich Panel [Volume 34, Issue 4, 2020, Pages 563-571]
Yousefi, Fahimeh
The effect of Benomyl antifungal on the gall ink used in historical documents [Volume 34, Issue 2, 2019, Pages 276-289]
Z
Zabihzadeh, Seyed Majid
Efficiency of Response Surface Methodology to Determine Effective Factors on Production Process of Carboxymethyl cellulose from Populus [Volume 34, Issue 2, 2019, Pages 290-301]
Zabihzadeh, Seyed Majid
Effect of test temperature on creep behavior of heat treated of Velvet Maple [Volume 34, Issue 3, 2019, Pages 424-434]
